Honda Power Equipment WB20

Description

Key Features

General purpose, centrifugal 2" pump

Easy starting Honda OHV commercial engine

164 gal./min. capacity

Durable silicon carbide mechanical seal

Cast iron volute and impeller

Features

Easy starting Honda OHV commercial engine: The durable Honda GX series commercial grade engine is easy starting and provides ample power for the toughest conditions.

Durable silicon carbide mechanical seal: The WB20 features abrasion-resistant silicone-carbide seals for extended wear.

4 vane high efficiency impeller: The WB20's exclusive, Honda-designed 4 vane impeller offers improved performance and high efficiency.

Cast iron volute: The rigid-mount cast iron volute reduces case wear, increasing the life of the pump.

Heavy duty full frame protection: Protects the pump, while offering a convenient tie down location for transport.

Isolation mounted engine and pump: High performance mounts minimize vibration, keeping the pump from "walking" away or "burying" itself in soft soil conditions. The reduced vibration also reduces wear on components, increasing the pump's durability.

Protected by Honda Oil Alert(r): Protects the pump by shutting the engine off when low oil is detected.

3 year residential/commercial warranty: You can rest easy, knowing your pump is covered from top to bottom for 3 full years.

Large strainer: The strainer allows up to 8 mm (5/16 in.) solids to pass through, helping to prevent clogging.

Specifications

Engine: GX120

Displacement: 118cc

Bore and stroke: 2.4 in. x 1.7 in.

Compression Ratio: 8.5:1

Oil Alert: Std

Pump type: Centrifugal., Self-priming

Volute: Rigid Mounted Cast Iron

Impeller: 4 Vane Cast Iron

Mechanical Seal (Pump case / impeller): Silicon Carbide/Silicon Carbide

Priming time: 110 sec @ 16.4 ft.

Drive system: Direct

Discharge capacity: 164 gpm

Suction port diameter: 2 in. NPT

Discharge port diameter: 2 in. NPT

Total head lift: 105 ft.

Suction head lift: 25 ft.

Maximum pressure: 45 psi

Solids handling: N/A

Dimensions (LxWxH): 19.3 in. x 14.4 in. x 16.5 in.

Dry weight: 44 lb.

Fuel Capacity: 0.53 gal.

Run Time @ Max Discharge: 1.7 hr

Strainer Part #: 78325-YG3-000

Residential Warranty: 3 years

Commercial Warranty: 3 years

Accessories

A wide variety of hose kits, couplers, adaptors, and other accessories are available.